The simple name of a fuel dispenser is a fuel pump, which is classified into many categories, including a single pump single gun fuel dispenser and a single pump double gun fuel dispenser. Like all machinery, the service life of the tanker is limited, but reasonable daily protection can significantly increase the service life of the tanker. So how should it be protected? Tell me about the fuel dispenser manufacturer?
A gas dispenser is a terminal device for paying gas at a gas station. Once the tanker malfunctions or runs ill, it will affect the business at least, and turn into an accident at the worst. Therefore, in the daily operation of the gas station, the effect of the tanker is not important, and the safety function must be maintained at all times.
The fixed refueling machine can make the car position clear, the refueling procedure is not easy to be disordered, the work efficiency is high, the price is low, the fault is few, and the maintenance is easy. However, the area is large and the refueling range is small. The vehicle must be refueled within the predetermined range. Due to the self-priming capacity of the tanker self-priming pump, the distance between the tank and the underground tank must not exceed 20-25 meters, and the suction height is 4 meters. Affect the refueling of the tanker.
The first is the relief valve spring. It can adjust the pressure of the entire system. If the adjustment is too tight, the time used will cause the system pressure to increase, and then the sound and vibration during operation will become very serious. Then directly lead to premature wear of the bearing.
A fuel dispenser is a fuel metering device that directly refuels a motor vehicle. It forms a complete oil supply system with oil tanks, pipelines, pipe fittings and valves. The fuel dispenser is composed of the four major assemblies of oil pump, oil-air separator, meter and counter, as well as some other components such as electric motor and oil gun. Any type of fuel dispenser can be regarded as composed of this major assembly and other simple components. constitute.
The second is the triangle belt. Its contraction force is related to the size of the fuel supply. If the contraction force is too small, it will cause a sudden decrease in fuel supply. But if the shrinking force is too large, the load on the bearing will increase a lot. This will also lead to premature wear of the bearing and shorten the service life.
