+86-135-98081203

Some Small Details That Need To Be Paid Attention To When Using A Fuel Dispenser

Sep 06, 2021

When the pressure of the tanker is too high, it will shorten the service life of the tanker, which will cause the following failures: excessive oscillation of the tanker, number of switches on and off, damage to the oil pump, damage to the solenoid valve diaphragm, oil leakage in various joint parts, and oil monitor The glass bursts and the oil leaks after the oil gun is closed. When refueling, the oil vapor evaporates too much, which causes the smell of the gas at the gas station to increase, which is not only unfavorable to environmental protection, but also a safety hazard.

The tanker is well grounded, which can effectively eliminate static electricity and filter out boundary interference. Adding the stability of the tanker computer motherboard and the safety of data parameters can well eliminate the potential safety hazards caused by static electricity. The oil gun, movable joint, hose, and oil sight of the refueling machine must be reliably connected. If the oil gun is poorly grounded, when refueling, the static electricity on the vehicle cannot be discharged through the oil gun, movable joints, hoses, sight gauges, refueling machines, ground wires, and the earth, which will cause the gap between the oil gun and the vehicle fuel tank when refueling. Shows the phenomenon of sparking, which may cause dangerous accidents.

First of all, it cannot be modified without authorization. The pipeline on the tanker is fixed. In order to obtain higher refueling efficiency, some gas stations will add a branch pipeline to the tanker. This method is absolutely unusable and there are hidden dangers in use. Also, two fueling guns cannot use the same fueling machine. The newly added tanker must be rigorously debugged before being used, and the debris inside can be used normally.

Tanker manufacturers usually have metering guns with self-sealing function or metering function, so they usually say self-sealing guns or metering guns. There are some differences between the two. Self-sealing guns are used if the barrel touches the oil. It will automatically turn off, and there is a meter display on the metering gun, which can clearly see the relevant data of the oil.


Send Inquiry