+86-135-98081203

What Precautions Should Be Paid Attention To For Fueling Guns?

Oct 07, 2021

After the fuel gun is started, turn on the switch handle of the fuel gun, and the fuel will pass through the main valve hole and output through the venturi, outlet valve and barrel. When refueling, because the oil quickly flows through the venturi tube, a low pressure zone is formed in the sealed cavity between the venturi tube and the auxiliary valve seat, which leads all the way from the trachea to the air nozzle at the front end of the barrel to the upper cavity of the automatic control membrane. When the oil or foam in the container does not reach the air nozzle, the low-pressure area is released due to the large air volume of the air nozzle; when the oil or foam floods the air nozzle, the air nozzle is blocked and a negative pressure is formed in the upper cavity of the self-control membrane. Make the automatic control film move up and the steel ball slide down.

1. Do a good job of daily inspection and protection of the fuel gun

Inadequate daily inspection and protection are the main factors leading to the unreliable conductivity of the fuel nozzle, so daily inspection and protection must be strengthened.

① When the team informs the equipment, pay attention to check whether the connection between the adapter sleeve and the gun body is loose. If it is found to be loose, report it for repair in time.

②The connecting part of the "universal joint" is easy to deposit sludge due to the dripping of oil and the ingress of dust. The equipment should be cleaned in time during weekly maintenance.

③The fueler or on-site inspector (self-help) should reel the hose to the fueling island in time after refueling to prevent it from being crushed and cracked by the vehicle. If the hose is deformed and cracked, report it for protection in time.

④ Repairers must be standard, serious, and careful when repairing equipment. For example, when replacing the refueling hose, ensure that the metal wire of the hose and the union are well touched, and the sealing parts of the joint should be sealed with good conductivity, and the repair should be carried out in time. Electrostatic continuity detection to ensure excellent conductivity of the oil gun.

2. Perform regular inspections and establish anti-static files

The gas station regularly conducts a continuity test on the fuel gun every month, and measures the grounding resistance of the electrostatic grounding body every spring and autumn, and establishes a measurement data file. In the meantime, it must be tested by a unit with legal qualifications.


Send Inquiry