How should the tanker be properly maintained? Please remember the following six points:
1. Pay attention to the temperature of the pump bearing of the oil dispenser, which should not exceed the external temperature of 35°C but should not exceed 75°C at the highest.
2. The oil cup of the oil dispenser equipment should be filled with calcium-based butter to ensure that the bearings can be lubricated normally.
3. Within the first month of operation, or after 100 hours of operation, the butter in the motor support oil cup should be replaced. It will be replaced every 2000 hours in the future.
4. Regularly check the elastic coupling and pay attention to the temperature rise of the motor bearing.
5. During the operation of the tanker equipment, if any noise or unusual sound is found, it should be stopped immediately for inspection.
6. The tanker equipment should be checked periodically every 2000 hours of operation. The wear of the gap between the impeller and the pump body (or the pump cover) should not be too large, and the maximum value of the gap should not exceed 1.5 mm. If it exceeds, the impeller or cover can be replaced.





