The mopping of the tanker hose not only affects the neatness of the station, but also presents the danger of being run over by vehicles. The hose stretch balancer effectively handles various problems caused by the hose mopping, and can also extend the service life of the tanker hose. The fuel dispenser can be equipped with a hose stretching balancer, which can effectively avoid the conflict between the fuel hose and the ground, and can also prevent the hose from being rolled over by the vehicle due to the failure of the hose to be stowed in time. It not only makes the working environment around the tanker more tidy, but also prolongs the service life of the oil conveying hose, which can alleviate the labor intensity of the staff at the gas station and increase the working power.
Whether the quality of the fuel gun product itself is reliable, and whether its functions can meet the requirements. In addition to quality, we must also pay attention to the maintenance of the fueling gun. The maintenance and maintenance of the fueling gun is the basis and condition of the application. As the fueling gun is used for a long time, the wear of the parts is inevitable. If the damage is severe, The stability of normal operation decreases, the operation power decreases, and some damages may not be repaired, and new parts are replaced.
There are several reasons why the oil and gas cannot be separated from the tanker: too much gas leaks in the oil pipeline of the tanker manufacturer, resulting in the failure of the oil and gas separation, and the exhaust pipe of the oil and gas separation component is blocked. The conical valve of the oil and gas separator of the fuel dispenser is not closed tightly, and the float valve in the patented pump of the fuel dispenser is not closed tightly.
When using a single-phase motor, the user's power cord should be a copper core sheathed wire with a cross-sectional area of not less than 6 square millimeters. Otherwise, it may cause the motor to fail to start or even burn out. Prevent the use of single-stranded wires and aluminum core wires.
The connection line between the power distribution room and the fuel dispenser uses the bushing buried method to prevent the vehicle from breaking the wire. Set an open oil-resistant elbow at the cable outlet that penetrates the base hole of the tanker to prevent oil from dripping into the steel pipe to corrode the cable, and to prevent arbitrary joints from being installed in the middle of the cable from the power distribution room to the tanker to avoid accidents. Sparking endangers the safety of the gas station.
