Contact Us
- No.8, the 5th Diamond Rd, Zhengzhou New Materials Park, Zhengzhou City, Henan Province, China.
- sales@eaglestarpetro.com
- +8613598081203
Bottom ValveBottom valve, also called emergency shut-off valve, is installed on the bottom of tank, built in shut-off groove. His body will disconnect along the groove to realize the disconnection of the bottom
Add to Inquiry
Dip HoleDip hole is a special accessory used to measure the oil level in the tank and to take oil samples. One is set on the top of each oil tank, most of which are located near the tank ladder platform. The
Add to Inquiry
Oil Water SeperatorOil-water Separator is installed on the control pipeline to extract the air source from air cylinder. When the pressure air gets into the oil-water separator, it will vapor the lubricate the air to
Add to Inquiry
Pneumatic Interlock ValvePneumatic Interlock Valve is installed on the vapor recovery valve or API adaptor to do pneumatic interlock. As an emergency vent valve with reset function, when you press it down and loose it, it
Add to Inquiry
Hander ValveThe hander valve is a two-channel three-vent structure for inner and outer exhausting.It is connected with all ports according to demanding. When pulling or pushing the handle, it will open or close
Add to Inquiry
Botton ValvePress button is installed on the end of fuel truck and far away from unloading position. As a emergency control switch for pneumatic system, press button is connected to emergency vent of pneumatic
Add to Inquiry
Anti-overflow Probe RodAnti-Overflow probe rod is used for oil tank. When there is down-unloading, it can monitor the inner state of the tank, working with the platform control system to make sure the safety and
Add to Inquiry
Combing Vent ValveVapor recovery valve will be installed on the vapor recovery pipeline on the top end of the tank, the downward outlet side is 45 degree angle with horizontal direction to effectively prevent from the
Add to Inquiry
Vapor Recovery ValveVapor recovery valve is installed on the manhole to make sure no leakage when the tank rolling down. The outlet terminal is connected with vapor recovery pipe line by flexible pipe. when the tank is
Add to Inquiry
Gravity Drop CouplingThe gravity coupling is used far quickly discharge.We offer different size, the oblique angle design, more suitable for gravity discharging. make flow more faster, and effectively protect the the
Add to Inquiry
Breath ValveP/V vent is installed on the top of manhole to adjust the pressure between inner and outer of the tank, which can be set different opening pressure according to different usage, to avoid leakage and
Add to Inquiry
Manhole CoverManhole cover is installed on the top of the tank to prevent the fuel leakage when tank is over rolled,built in P/V vent to adjust the pressure. If there is pressure difference between inside and
Add to Inquiry
Kohler Fill Valve This fill valve kit is designed for all Kohler Class Five Toilets,12.5″ x 3.5″ x 3″. The silent fill provides a gracious experience by filling the tank quietly. Multiple fill rate...
Take your grips (or an adjustable spanner) to the nut on the isolating valve or tap connector that is screwed onto the bottom of your fill valve and turn it anti-clockwise till it loosens enough to...
Contact seller Toilet Valve with Brass Tail 1/2" 20mm Bottom Inlet Float Valve More than 10 available See Feedback 30-day returns May not post to United States Delivery: Sponsored items customers...
Jun 15, 2014 · The standard size of the plastic threaded end of the bottom entry ball valve appears to be 20mm approx. with a 23mm nut (outer dimensions). So that would require a 3/4"...
bottom entry fill valve 20mm Manufacturers, Factory, Suppliers From China, If you are looking for a good quality, fast delivery, best after service and good price supplier in China for long-term...
When the flapper of the fill valve is faulty, you could hear the water filling the toilet tank continuously. The problem is that it can’t completely close the outlet to the toilet bowl. As such, the...





